An electric car charging between two lit DC fast chargers under a canopy at night
Equipment & EV infrastructure guide

Financing EV chargers, electrical upgrades and site equipment.

The chargers are only part of the bill. Here's how to budget the full installed project, when equipment financing is enough and when you need project financing, and how lenders look at utility timelines and usage.

Last updated

The short answer

Equipment financing can pay for chargers, transformers and other identifiable equipment. Utility work, engineering, permits, trenching and installation often aren't covered, or are capped, so most charging projects are financed as a broader project: a term loan, an SBA loan or part of an acquisition or refinance. Lenders want the full installed budget, utility confirmation and conservative usage assumptions, and they usually rely on your existing business to carry the payment.

The installed cost stack

What a charging project actually costs

Every layer below shows up in a real budget. Which layers a lender will finance depends on the structure.

  1. Chargers and related equipment

    Level 2 or DC fast chargers, pedestals, cable management, payment and network hardware, software subscriptions.

  2. Transformers, switchgear and panels

    New or upsized transformer, switchgear, distribution panels, meters and the electrical service upgrade itself.

  3. Utility coordination and interconnection

    Service requests, load studies, utility design and any make-ready or line-extension charges the utility passes on.

  4. Engineering, permits and inspections

    Electrical and civil design, site plans, permit fees, inspections and commissioning.

  5. Trenching, conduit, foundations and installation

    Boring or trenching, conduit and wire, concrete pads, bollards, labor and restoration of paving.

  6. Related site and facility improvements

    Lighting, canopy, striping, accessible stalls, signage, and other upgrades done at the same time.

Equipment financing typically centers on the first two layers. Some lenders also cover part of the installation. Project financing can cover the full stack, subject to the lender's review of the budget. Coverage depends on the lender and structure.

Equipment vs. project financing

Two ways to finance the same project

TopicEquipment financingProject financing
What it financesIdentifiable equipment: chargers, transformers, switchgear, dispensers, wash systemsThe whole installed project: equipment plus design, utility, site work and soft costs
CollateralThe equipment itself, sometimes with a business guaranteeThe business, real estate or a broader lien, depending on the structure
Installation and soft costsSometimes covered, often capped as a share of equipment cost; varies by lenderUsually included in the budget, subject to the lender's review
How funds flowUsually paid to the vendor at delivery or installationIn draws as work is completed and inspected
Common formsEquipment loan, finance lease, vendor financingTerm loan, SBA 7(a) or 504, construction or bridge loan, part of a larger acquisition or refinance
Utility capacity, sequencing and disbursements

Get the order right and the money follows

The utility often sets the critical path. Lenders typically release funds as work is completed and verified, with the final payment after energization and inspection.

  1. Site and load review

    Confirm available capacity at the meter and what the utility will need to upgrade.

  2. Utility application

    Submit the service request early. Utility timelines are often the longest part of the project.

  3. Design and permits

    Engineering, permit drawings, and equipment selection that matches the approved service.

  4. Financing close

    Close on the structure that covers the budget you actually need, with a contingency.

  5. Construction and draws

    Site work, conduit, pads and electrical work; funds released as work is verified.

  6. Energize and commission

    Utility energizes the service, chargers are commissioned and inspected, final payment releases.

Highlighted steps are where financing funds are typically committed or released.

Contractors and usage

Two things lenders always ask about

Contractor coordination

The utility, electrical contractor, equipment vendor, network provider and inspector all touch the schedule. Name one party to own it, and make sure bids clearly state what's excluded.

Realistic utilization

Use comparable sites, not best-case projections. Show the payment works if usage ramps slowly, and account for demand charges, network fees and maintenance.

A teal pad-mounted electrical transformer beside a road
Rules and incentives

What's required, and what's available, depends on the project

Codes

There's no general requirement that existing gas stations, car washes or truck stops install EV charging. Some state and local building codes require EV-capable or EV-ready parking in certain new construction or major renovations. Check with your local building department.

Incentives

The federal Section 30C charger credit doesn't apply to property placed in service after June 30, 2026. State, utility and local programs vary by location, budget and timing, and not every project qualifies. Confirm before you count on one, and plan financing that works without it.

Financing options

Options and their limits

Equipment loan or finance lease

Often fitsChargers, transformers, dispensers and other identifiable equipment.

LimitsShorter terms. Coverage of installation, utility charges and soft costs is limited or capped by many lenders.

Vendor or manufacturer financing

Often fitsBuying a specific brand's chargers or equipment packages.

LimitsTied to that vendor's equipment; compare the full cost and terms with other options.

Term loan or SBA 7(a)

Often fitsProjects that mix equipment, site work and working capital, or upgrades rolled into an acquisition or refinance.

LimitsUnderwritten on the whole business's cash flow. SBA eligibility and terms depend on the borrower and use of proceeds.

SBA 504

Often fitsLarger projects tied to owner-occupied real estate and long-lived equipment.

LimitsFixed assets only; equipment needs at least a 10-year useful life. Better suited to bigger projects than a few chargers.

Construction or bridge loan

Often fitsLarger electrification projects with long utility timelines.

LimitsShort term and draw-based; needs a takeout or permanent loan.

Underwriting

What lenders evaluate

Total installed budget

Equipment, utility, design, site work and contingency, supported by bids. Equipment-only quotes understate the cost.

Utility status

Whether capacity is confirmed, the expected timeline and who pays for upgrades on the utility side.

Utilization assumptions

Sessions per charger per day and price per kWh, compared with similar sites. Lenders discount aggressive ramp-ups.

Operating costs

Electricity rates and demand charges, network fees, maintenance and warranty.

Existing business cash flow

For most site owners, the station or wash, not the chargers, carries the loan in the early years.

Contractors and warranties

Licensed electrical contractor, equipment warranties and who's responsible for uptime.

Document checklist

What to gather

Project

  • Equipment quotes and specifications
  • Electrical contractor bid with scope and exclusions
  • Utility correspondence: load study, service request, cost letters
  • Permit status and site plan
  • Project schedule and contingency

Business

  • Three years of business tax returns and year-to-date P&L
  • Personal financial statements for owners
  • Any existing loan or lease documents for the site
  • Utilization or revenue assumptions, with their basis
Common obstacles

What slows these projects

Budgeting only for the chargers

Get a full scope from an electrical contractor and the utility before you set the loan request.

Utility capacity found late

Ask the utility what's available before ordering equipment. Upgrades on the utility side can add cost and months.

Optimistic usage

Base the case on comparable sites, and show the business can carry the payment if usage ramps slowly.

Counting on incentives

Treat rebates and credits as upside until they're confirmed for your project and timeline.

Poor contractor coordination

One party should own the schedule across utility, electrician, equipment vendor and inspector.

FAQ

Equipment and EV financing questions

Does equipment financing cover installation and electrical work?

Sometimes. Equipment loans and leases focus on the equipment itself; some lenders cover a limited share of installation, and others cover none. Utility charges, engineering, permits and site work are more often financed through a term loan or broader project financing. Coverage depends on the lender and the structure.

Is EV charging required at my gas station or car wash?

Not as a general rule. Some state or local codes require EV-capable or EV-ready parking in certain new construction or major renovations, so check with your local building department. Adding chargers to an existing site is usually a business decision.

Can I still claim the federal 30C charger tax credit?

Not for property placed in service after June 30, 2026, when the federal Alternative Fuel Vehicle Refueling Property Credit (Section 30C) ended. State and utility programs vary by location and change often; confirm availability with the program and your tax advisor before relying on one.

How do lenders look at charger revenue?

Cautiously. Early utilization is hard to predict, so most lenders lean on the existing business's cash flow to support the payment and treat charging revenue as upside until there's history.

Who pays for transformer and utility upgrades?

It depends on the utility. Some costs fall on the customer, some are covered under utility make-ready programs, and the split can depend on load and location. Ask the utility for a written cost estimate early.

Can upgrades be financed as part of buying a station or wash?

Often, yes. Planned equipment or electrical upgrades can be included in an acquisition or refinance budget if the lender and program allow it. See the gas station, car wash and truck stop guides.

Have a quote or a utility letter?

Send what you have. We'll talk through which structure could cover the full project.

Start the conversation
People you can call

You'll know who's working on your financing.

Talk with Matt and Alex. You get a clear next step and someone to call when a question comes up.

Matt Ridge, Managing Director at Solaire Capital

Matt Ridge

Managing Director

Former Delta Bank executive who has closed more than 2,000 SBA loans over his career. He helps you weigh your options and present a request lenders can act on.

Alex Plichta, Client Lead at Solaire Capital

Alex Plichta

Client Lead

Your contact for documents, updates and follow-through as your financing moves ahead.

Talk with Solaire

Tell us about the project.

Share the site, the equipment and what you know about utility capacity. We'll talk through how to finance the full installed budget.

646-552-7701advisory@solairecapital.com

What can we help you finance?

We use your details only to respond to your inquiry. Starting a conversation doesn't commit you to anything.